EIA rack rail, tapped rack rails, etched rack rails

Return to Home Page

EIA Rack Rail

Pick Your Own
19" Rack Width Pick Your Own Pick Your Own Pick Your Own

EIA Rack Rail Types

DUAL TAPPED RACK RAIL
Both legs tapped (10-32)
Required rail for use with our knock-down racks

Click Here to Purchase Dual Tapped Rack Rail

A - Width Rails
Each Rack includes 4 each rack rails in compliance with the industry standard for 19-inch wide rack mount equipment. All rack rail is etched every 1-3/4" to facilitate simplified component mounting.
B - Depth Rails
Each Rack includes 4 each depth rails. Depth rails are available to build a Rack in 4 distinct depths. All rack rail is etched every 1-3/4" to facilitate simplified component mounting.
C - Height Rails
Each Rack includes 4 each height rails. Height rails are available to build a Rack in 10 distinct rack heights. All rack rail is etched every 1-3/4" to facilitate simplified component mounting.

:

D- Connecting Corners

Used to attach all adjoining rack rails and tightly secure your Rack into an incredibly strong and stable structure. Each Connecting Corner is precisely cast in zinc alloy for ultimate strength & endurance.

E- Dog Point Screws

Used to attach all connecting corners to corresponding width, depth & height rack rails. Ample dogpoint screws are including in each Master Pack A to fully assemble eight connecting corners to corresponding width, depth & height rack rails.

F- 3" Twin-wheel Casters
(optional)*

Set of 4, 3" diameter, twin-wheel casters having total weight capacity of 400 lbs. combined. All casters have a full 360 degree swivel. Two of the set of four casters have a positive engaging braking system.

G- Side Handles (optional)

For easy maneuverability and lifting your Rack, we recommend using our Side Handles option. Side handles also serve to provide additional stabilization.

H- Cross Braces (optional)

For added stability under high weight loads, we recommend using our Cross Brace kit option.

*Fully loaded Rack should not exceed 400 lbs. It is the users responsibility when mounting rack equipment to distribute equipment weight appropriately.

Star Case Manufacturing Co., Inc.
(219)922-4440 FAX: (219)922-4442
(800)822-STAR
(800)782-CASE
e-mail: star@starcase.com

Copyright : Star Case Manufacturing Co., Inc.

The data contained in this document is the property of Star Case Manufacturing Co., Inc. and is not to be reproduced or distributed without authorization from Star Case Manufacturing Co., Inc. www.starcase.com

A - Width Rails Each Rack includes 4 each rack rails in compliance with the industry standard for 19-inch wide rack mount equipment. All rack rail is etched every 1-3/4" to facilitate simplified component mounting.	B - Depth Rails Each Rack includes 4 each depth rails. Depth rails are available to build a Rack in 4 distinct depths. All rack rail is etched every 1-3/4" to facilitate simplified component mounting.	C - Height Rails Each Rack includes 4 each height rails. Height rails are available to build a Rack in 10 distinct rack heights. All rack rail is etched every 1-3/4" to facilitate simplified component mounting.
:
D- Connecting Corners Used to attach all adjoining rack rails and tightly secure your Rack into an incredibly strong and stable structure. Each Connecting Corner is precisely cast in zinc alloy for ultimate strength & endurance.		E- Dog Point Screws Used to attach all connecting corners to corresponding width, depth & height rack rails. Ample dogpoint screws are including in each Master Pack A to fully assemble eight connecting corners to corresponding width, depth & height rack rails.
F- 3" Twin-wheel Casters (optional)* Set of 4, 3" diameter, twin-wheel casters having total weight capacity of 400 lbs. combined. All casters have a full 360 degree swivel. Two of the set of four casters have a positive engaging braking system.	G- Side Handles (optional) For easy maneuverability and lifting your Rack, we recommend using our Side Handles option. Side handles also serve to provide additional stabilization.	H- Cross Braces (optional) For added stability under high weight loads, we recommend using our Cross Brace kit option.
		*Fully loaded Rack should not exceed 400 lbs. It is the users responsibility when mounting rack equipment to distribute equipment weight appropriately.